Guess the Artefact #3

This week’s Guess the Artefact challenge centres around an artefact used by generations of school children. There are some adults who may even have used these themselves when they were at school. It is interesting to see if modern students can recognise this object and work out how it was used. The picture below comes from the Victorian Collections website, managed by Museums Australia (Victoria). This website is a great source of images and texts from bygone days.

This object is rectangular and made of a relatively thin piece of black stone,measuring 25 x 17.5 cm, surrounded by 4 pieces of wood, which are a couple of centimetres wide. The corners of the wooden pieces have been rounded. There are several sets of faint parallel lines from left to right across the front of the stone, each pair of lines separated by a small gap. The back is plain, without parallel lines. The surface of the stone is slightly scratched. The letters “O.F” have been written and slightly incised into the topmost strip of wood. There is a small hole in between these two letters.

The dark stone is a fine-grained argillaceous (clayey) rock, called slate, which breaks naturally into thin slabs. In Australia, this rock was mined in South Australia, NSW and Tasmania in the 19th century.  The dark surface of the stone reminds one of an object which was common in classrooms until fairly recently. Can you guess which one? They have been mostly replaced by whiteboards in modern classrooms. Yes, it does look similar to a blackboard, but much smaller.

The spacing of the lines is also important and might look familiar. Can you think of a familiar object, also used in classrooms, that has similar lines? Especially the ones used by younger students have similar lines. Yes, pre-ruled exercise books, with spacing for upper and lower case letters have very similar lines.

So it seems that we have a small blackboard-type object marked with lines for learning to write letters. In fact, that is exactly what this is! These objects were called “slates” (I’m sure you can work out why) and were used in place of exercise books by students in schools from the time that Australia was first settled by Europeans, throughout the colonial period in the 19th century and even into the 20th century. Some schools in Queensland continued to use them into the 1960s, but in most places exercise books were used from the 1920s or 1930s.

Children with slates in classroom, Queensland, 1940.

The slates marked with parallel lines were used by younger students learning to write and form their letters correctly, but they were also used for all lessons in many classes. In fact, younger children often struggled to manage the correct use of a slate pencil. The reverse side (with no lines) was used for writing Maths sums and drawing. Until the 1930s, when the bulk manufacture of paper from pulp made from eucalypt trees made paper more readily available, paper was relatively expensive. Thus, where books were provided to students, they were only given to older students, whom, it was hoped, would make less mistakes and would therefore waste less paper. Students used a pencil made from a softer kind of slate, which made white marks on the dark slate, or chalk, to write on the slate. The slate pencil was tied onto the slate using string or ribbon, tied through the hole in the top of the frame. A damp sponge was used to erase the work. Sometimes ‘books’ of 2 or 3 slates were tied together, but usually students would have to write down their lesson, have it checked by the teacher, memorise it and then erase what they had written. This would have meant that they had no notes and had to rely entirely on what they could remember when they wrote their exams!

In practise, sponges would get lost or dirty and students would spit on the slate and rub it out with their sleeves. The wear and tear on clothes led to complaints from parents. Students would also suck on the pencils, as they worked better when damp. Concerns were made about hygiene when using slates. In 1909, a School Medical Officer in the UK managed to culture the bacteria that causes diphtheria off the slate pencils in one particular class, and there were calls for the use of school slates to be discontinued. However, it was also noted that slates were easier to disinfect than paper.

Slates were also used in homes – for writing shopping lists and the like. Archaeological excavations of houses and schools from the 19th century have shown that slate pencils and writing slates were common. However, slate was also used for roofing tiles, which does confuse the evidence sometimes. Writing slates could be used over and over, unlike paper, which could only be written on once. This made slates significantly cheaper than paper for a long time.

Can you make a list of the Pros and Cons of using slates in classrooms? What would be different if you used slates today? How do you think using slates influenced the way lessons were taught in schools? Think about what could be taught and what could not…

Free Robotics Incursion in Brisbane Area

caterpillar-headIf your school or homeschool group is based in our around the Brisbane area, we can visit with our robotic caterpillar and other critters as part of our FREE Robotics Incursion.

The caterpillar has quickly become our main mascot, as students, teachers and parents take a liking to it! It is an autonomous robot, with a 3D printed frame and Arduino controlled electronics.

caterpillar-logo-banner-1260x240
The OpenSTEM caterpillar design and code are fully open and also serve as a good example of how subjects such as robotics can be explored at relatively low cost – that is, without expensive branded kits. This can be a real enabler for both school and home.

For more details on what we cover and do on this incursion, see the Robotics Incursion page, or contact us to discuss!

OSDC 2015 talk: Skulling Around – Hands on History

Here’s the video of Claire’s talk at the Open Source Developers’ Conference 2015 (November) in Hobart, TAS.

homo-ergaster-frontOpen source has opened up huge opportunities for archaeologists. As well as high quality tools for research, we can use open source to engage kids with the past. Addressing the new National Curriculum, we use 3D printed fossil skulls and replicas of archaeological material to give kids a hands-on experience, making the past Funky and Fun!

Arjen's Diamond Mind v2 3D-printerArchaeologists are usually very good at sharing knowledge with each other and the wider world. Under Creative Commons licences many files are made available, including scans of fossil skulls, artefacts and other archaeological material. Using a suite of open source tools, including a 3D printer, a series of interactive experiences for school children has been developed allowing them hands-on involvement with this material.

The kids love examining the replica fossil skulls in their hands and learning about the changing features through time, as well as learning to measure and compare in a very real sense. These experiences are modern “we had 3D printed stuff in History class!”, engaging and fun for students and teachers alike, bringing the past alive.


This talk refers to some of the materials used in the OpenSTEM Introduction to Archaeology and Fossils Workshop. We have been fortunate to find quite a few more fossil skull models, and have already printed some of those also. The “family” is growing!

OpenSTEM also has an Integrated History/Geography Program for Primary Schools (full set of resources for F-6, including teacher handbooks, student workbooks and assessment guides), available from term 1, 2016.


There were many awesome talks at OSDC 2015 (Youtube playlist). See also the OSDC 2015 program overview.

Press coverage for OpenSTEM Robotics Program at Grovely State School

BrisbaneNorthWestNews-2015-08-05-GrovelyRobotics-1-50
A journalist and photographer from Brisbane’s North-West News visited Grovely State School, providing this very nice write-up. This is a great acknowledgement of all the work and achievements by the students in the senior classes on electronics soldering, robotics and programming!

BrisbaneNorthWestNews-2015-08-05-GrovelyRobotics-2-50
It’s been fabulous working with the students and staff at Grovely, and everybody is having a great time – almost forgetting that the OpenSTEM Robotics Program is real curriculum related school work rather than just an incursion experience!

Serendipitously, the Queensland government has recently announced an intention to focus specifically on programming and robotics in education:

“Our goal is to make sure our students are at the cutting edge of innovation through the development of skills to become the technology architects of the digital age,” Queensland Premier Annastacia Palaszczuk said, “This will include an assessment of coding and computer science, as well as early stage robotics, something I firmly believe should be a part of our education system.”

Advance Queensland’ package announcement (July 2015)

We’d love to work with your school too, contact us today! We’re  currently accepting expressions of interest for the second half of Term 4 (2015) and 2016, and we’re also happy to visit you to meet and discuss your ideas and needs. We love our Robotics Program, but we do much more!